There are a plethora of safety issues if you have a shed on a slope or even an uneven shed on flat ground, but there are things that you can do to solve these problems.
Unfortunately, you can’t go out and buy a shed from a big name retailer and expect it to be safe on sloped land.
You’ll have to build your shed to make sure that you can make all accommodations and necessary adjustments to ensure that the floor is level.
Installing a shed can be a stressful task to take on, especially if you don’t have a lot of experience.
If you’ve ever wondered how to level a shed on a slope without running into a long list of problems, you’re in the right place.
Below we’ll discuss how you can build your shed easily with the help of My Shed Plans, how you can easily level a shed on a slope, and more!
My Shed Plans: Building Your Own Shed
Many instructional guides out there can be confusing and hard to follow.
Thankfully, My Shed Plans makes it easier, even if you’ve never built a shed before in your life.
With the software, you can choose from over 12,000 plans and designs, allowing you to find something that fits what you’re looking for at the moment.
One reason this CD set is different from others like it is that it shows you a 3D model of what you’re building, making a world of difference, especially for beginners.
It allows you to see where each piece of wood goes and how the finished product will look.
It’s frustrating to get halfway through a project and realize that you’re missing one or more materials.
The software also comes with a complete list of materials needed so that you can avoid last-minute hiccups.
The company even gives a free sample of what you get in the software set.
How to Level a Shed on a Slope
Before you go out and get your supplies after picking a shed style from the software, it’s important to learn the tips and tricks involved in safely leveling a shed on a slope.
To make it as easy as possible, we've broken it down into just four essential steps.
Do note that you don’t need to be a master craftsman to be able to complete projects like this successfully!
Whether this is your first woodworking project or you do it for a living, the steps listed below will help you learn how to get the job done with ease.
1. Measure the Degree of Ground Unevenness
The first thing you’ll need to do is to find out the degree of unevenness on the land where you want to place the shed.
To do this, you’ll need a few important materials, including four stakes, a level, a builder’s twine, a measuring tape, a pen, and a piece of paper.
- What you need to do is drive stakes into the ground at the four corners where you want the shed to sit in the exact location you plan on placing it.
- When the ground is uneven, it can vary quite a bit from one spot to another, so it’s crucial to pick the exact spot you want the shed's final location to be.
- Next, it’s time to connect the stakes with builder’s and make sure it's level between each set of stakes by using a leveling device.
- Measure the distance between the level line of twine and the ground using your tape measure. Doing this will give you the degree of the slope, and it’s best to jot this number down on a piece of paper that you can look back on later.
2. Excavate a Higher Wall
Now that you know what degree of slope that you’re working with, it’s time to get to work.
If the slope isn’t too extreme and is somewhat easy to work with, you’ll be able to excavate a higher wall.
You’ll also need to build up the soil on a lower side to ensure that foundations blocks will be set with the tops completely level.
It’s important to do this step right the first time to avoid having to start over.
For this step, you’ll only need between 12 and 16 concrete blocks and four, long, thin boards.
- Take one solid concrete block on one side and place either two or three stacked concrete blocks on the other side to keep the floor area as level as possible.
- These blocks tend to be about four inches thick, making it easy to adjust a slope with just a couple of blocks.
- Finish this step by putting a board across the blocks to double-check that everything is level, allowing you to move on to the next step.
3. Pier and Beam-Based Construction Method
If you’re working with slopes that are a bit more intense and steep, you’ll want to use a pier and beam-based construction method.
To go about this method, you’ll need a handful of materials, namely a posthole digger, gravel, concrete mix, wood beams, and pier forms.
- The first thing you’ll need to do is dig four holes using the posthole digger and making a base inside of the hole with the gravel.
- Next, you can make your own or buy a pre-cast concrete pier and place that on top of the gravel base.
- At this point, it’s important to make sure that the tops are level before moving forward.
- You’ll need to apply pier forms before putting the wood beams on top.
- After this, you’ll be one step closer to a level shed floor.
4. Protect It From Water
This last step could be applied to all sheds but is hyper-focused on areas that have a lot of precipitation or are near a body of water.
If the location where you want to build your shed is near a heavy water runoff, you’ll need to put in a bit more work.
It’s never a good idea to put a shed where water could build-up or where there is potential for a massive flow of water.
To avoid having to find an entirely new place to put your shed and not have the foundation support ripped away by water, you can elevate the floor.
Do this above any uneven land where water is an issue and a shed that has proper drainage.
You can use a wood or metal floor to enforce your shed.
After you’ve built a level foundation, add in a metal or wooden shed built kit on site.
Now that you know how to level a shed on a slope, are you ready to start building?
My Shed Plans makes it easy for just about anyone to get the job done in a short amount of time.
With the complete list of materials included for each design, you’ll have everything you need to get started after a trip to the store.
Once you figure out which shed you want to build, find where exactly you want to put it.
After that, you can follow the quick and easy steps above to make sure that you end up with a level shed.